[Editor's Note] Thanks to the accountants at Volvo North America and despite the pleas of many customers, their metal high mileage badges are being discontinued in favor of decals. You may be able to find a metal badge on EBay. If you are lucky enough to live in Europe, they are still available at this writing for EU customers.]
Courtesy of Brian Murphy.
Just a easy and cheap way to nicely mount high mileage badges so that they are easily removable.
Parts you'll need. Mine uses 5 washers but I have been able to make them with 4. You will need 2 screws, 2 nuts, and a high mileage badge.
The three washers in the bottom left corner are glued together
This is what the mounting bracket looks like without the badge.
Picture of the mounting bracket with the badge. Not glued together yet.
Picture of the mounting bracket glued to the badge. I used J.B. kwik weld for this. I am sure any decent glue will work.
The mount bracket/badge mounted to the grill. It is held in place by the nuts.
Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.
