Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head gasket job - - what to ask for from machine shop? 900

posted by  Oleseahorse on  Fri Dec 2 11:04 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:45 CST 2014
[RELATED]

I had great luck with Rick Gorka who owns a Machine Shop in Clifton Park. He skim cut the heads on all 3 of my 93 240's. two of the three had developed an external coolant leak. Each time I believe he milled 6/1000 and the cars ran fine and didn't leak afterwards.

He owns his own shop and is quite meticulous.

Down to one 240 :(

Marty




thahttps://www.brickboard.com/cdn-cgi/l/email-protection#9efcfcfff0f1f0bbacdcffa6faaaf8aba9aea7fffaadaaf8a9fbfcafa6acafa8a6fdfba7aca9fcaefff8defcecf7fdf5fcf1ffecfab0fdf1f3t






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Head gasket job - - what to ask for from machine shop? [900]
posted by  Adirondack Blues  on Wed Nov 30 20:02 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.