Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2024 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Head gasket job - - what to ask for from machine shop? 900

posted by  james_a_sousa on  Sun Dec 11 19:14 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 18:51 CST 2014
[RELATED]

While checking is a good ides, you should first remove the head and see why the gasket blew.

On a high mileage chevy V-8 that I had I found that the bolts at the ends of each head were only finger tight!

On out '95 854 with 96K, some of the gasket had corroded away and was nowhere to be found! I'll see if I can find the pictures.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Head gasket job - - what to ask for from machine shop? [900]
posted by  Adirondack Blues  on Wed Nov 30 20:02 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.