Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2010 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Pressure light hookup confusion 444-544 1964

posted by  Ron Kwas on  Sat Aug 10 04:14 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

Dylan;

Planetman has it right of course...the socket for lamp should be isolated from chassis and have two wires...one supplies Ign power, the other runs off to Sender...when sender has no pressure to open contact, it closes circuit to chassis, applying V across lamp. So it sounds like you should be looking for a second wire in the Instrument panel harness. Refer to Wiring Diag for color codes.

Good Hunting!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Pressure light hookup confusion [444-544][1964]
posted by  Dylan Berichon  on Fri Aug 9 12:37 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.