Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2005 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 rebuild 1800 1969

posted by  planetman on  Sun Sep 8 14:08 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

I should have them all in stock.

Do you know which M41 you have, the early version with small rear mainshaft bearing and "D" overdrive, the intermediate version with the large rear bearing with a "J" overdrive or the late version with the large rear bearing, "J" overdrive and large cluster shaft?

I stock original SKF bearings for the mainshaft. I have all of the individual needle bearings used for the end of the mainshaft, for the cluster and if needed the caged needle bearing assemblies for the 1st, 2nd and 3rd gears on the mainshaft for the 4 speed section and the 3 bearings for both styles of O/Ds.

I also have stock synchros, shift dogs, shift dog springs, thrust washers and gasket sets for the 4 speed section and I have reseal kits for both styles of O/D.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502
hiperformanceautoservice.com or oldvolvosonly.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M41 rebuild [1800][1969]
posted by  razki1115  on Sun Sep 8 13:15 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.