Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B6304S head gasket: go or no go? S90-V90

posted by  Adirondack Blues on  Wed Feb 19 15:40 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 8 12:11 CST 2014
[RELATED]

Under the clamping force of being bolted down, it will probably straighten right out. However, if you are worried, I'd just get a new gasket, since the job to replace is somewhat labor intensive.

Most of the head jobs I've done, I've found that I over worried many aspects of the work and they've all turned out fine. The tolerances aren't quite as critical as you might think. Not sending a man to the moon.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B6304S head gasket: go or no go? [S90-V90]
posted by  vp965  on Wed Feb 19 14:45 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.