Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No heat 200 1990

uid 46171's pic
posted by  kittysgreyvolvo on  Sun Feb 18 11:48 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 15:23 CST 2014
[RELATED]

Use all other suggestions you have here.

Use of stop leak for an enduring period can cause clogs.

So get onto your dyin' feet and dissemble the cooling system. As you must remove all that is the center of 240, inspect it for clogs.

Read the current article OVERHEATING QUESTION:

https://www.brickboard.com/RWD/volvo/1691034/220/240/260/280/overheating_question.html

The stop leak material, if you have used it for an extended period will settle at the lowest level, of the heater core. Or, a clog may be at the heater core valve interior assembly if you cannot. As Mr. Stevens says.

Drain and flush. Use a new HEPU or as Mr. Arty B. suggests on his site at:

https://cleanflametrap.com/heater_core/

https://cleanflametrap.com/

Arty B.: The Volvo 240 Godfather!


--
Give your brickboard.com a big thumbs up! Way up! - Roger Ebert & Gene Siskel




THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No heat [200][1990]
posted by  CLL  on Thu Feb 15 10:14 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.