Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Custom ECU on a B230F 900 1994

posted by  nathan2715 on  Sat Dec 21 21:50 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am keeping the camshaft sensor. I didn't know it was supposed to be used with another signal. I am designing a trigger wheel and making a mount out of 3/16in thick steel.

Here is a link to some cad work I did. https://a360.co/3Bz3KUZ I have checked to make sure everything fits, I'd give more permissions to download and whatnot if I had the Autodesk subscription.

I am going to have sendcutsend machine the trigger wheel. I also bought a hall sensor from diyautotune.

The trigger patten I'll be using is called dual-wheel, you can read about it here.
https://wiki.speeduino.com/en/decoders/Dual_Wheel

--
Nathan Micklatcher






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Custom ECU on a B230F [900][1994]
posted by  nathan2715 subscriber  on Wed Dec 11 20:19 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.