Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2001 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

help identifying broken valve attached to intake manifold 900 1995

posted by  Dave Stevens on  Wed Apr 23 13:19 CST 2025
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jan 1 02:36 CST 2012
[RELATED]

Cruise control servo. I've never seen one cut open. It must have been like that for some time as it looks rather oily/grungy inside. The missing piece is a rubber cup with a cable attached to the end that goes around the throttle spindle. The other end is connected with a vacuum tube to the cruise control motor and an instant release valve in a brake pedal switch. You can live without it if you don't care about cruising.

https://i.ebayimg.com/images/g/DRwAAOxy9eVRLTy0/s-l1600.webphttps://i.ebayimg.com/images/g/DRwAAOxy9eVRLTy0/s-l1600.webp

--
Dave -still with 940's, prev 740/240/140/120 You'd think I'd have learned by now






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help identifying broken valve attached to intake manifold [900][1995]
posted by  categimperat  on Tue Apr 22 19:19 CST 2025 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.