Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

help identifying broken valve attached to intake manifold 900 1995

posted by  categimperat on  Wed Apr 23 21:00 CST 2025
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

okay, here are the vacuum lines i need help with:

https://imgur.com/a/3bTKigh
^this one looks it was cut for some reason? it is attached to the wiring harness.

https://imgur.com/a/kk9uEqr
^this one labeled C. it hooked up to the intake manifold at the labeled nipple but was not attached to anything at the other end.

https://imgur.com/a/H4SVJLM
^this is a long plastic vacuum line that i think was originally purple and half turned green from heat. or maybe it's the other way round? it seems to be long enough to connect to the pulsair system but i wanted to be sure. I plan to delete/cap off the pulsair system anyway.

https://imgur.com/a/Nh0vg8j
finally, this yellow plastic line terminates at the same apparatus the above line does. i found it disconnected with no indication of where it goes.

thanks in advance for everyone's help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New help identifying broken valve attached to intake manifold [900][1995]
posted by  categimperat  on Tue Apr 22 19:19 CST 2025 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.