|
Sounds like a standard, run-of-the-mill OD relay glitch. Before you spend a penny, pop the cover off your relay and resolder the small internal printed circuit board. $0, 15 minutes, no risk, clean 'n easy work. If it doesn't help you're out $0.
The first pix below shows the relay location (your relay is either white or orange, the blue relay is for the standard tranny).
The second picture shows the circuit board for an OD relay, and if you look carefully you can see several cracked solder connections.
The third picture shows the same relay after I resoldered it. The relay still works great.



|