Error: you cannot edit this post. It has been too long since it was posted.

Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Banging from lower control arm bushings? 200

posted by  Aye Roll on  Thu Jul 29 23:17 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 14 21:08 CST 2014
[RELATED]

Most of the 240 front suspension noises I have encountered are from bad lower control arm bushings. These are the big ones at the back end of the control arm.
They are not very difficult to change. I use a chisel to crush the outer shell before hammering them out of the brackets. I simply tap the new ones into place gently using a hammer.

Good luck!
--
Rob Bareiss, New London CT ::: '87 244DL/M47- 230K, 88 744GLE- 220K, 82 245T-181K Also responsible for the care and feeding of: 88 745GLE, 231K, 87 244DL, 239K, 94 855GLT 189K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Banging from lower control arm bushings? [200]
posted by  Gauvain  on Thu Jul 29 16:05 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.