Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need help getting shafts to TDC 200 1982

posted by  taking8 on  Mon Sep 5 11:53 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm in the process of doing a bunch of maintenence on my '82 244 GLT, I was in the middle of the timing belt, but didn't have the 22mm socket to get the crankshaft bolt off, so I set about installing my adjustable cam gear and got everything out of TDC. Even in relationship to each other, I can't be sure that they are true. The cylinder head cover is off... that should help me out with the camshaft at least right? Are there any tricks to make this easy? and isn't it harder than just lining all the tick marks up? thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New need help getting shafts to TDC [200][1982]
posted by  taking8  on Mon Sep 5 11:53 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.