Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2001 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

what's the best cam..? 200 1980

for my 1980 242gt w/B21F? I hear a D cam is good, while with a K cam I will lose low end torque. What about the VX? any suggestions?? i need more power for my NA!!








  REPLY TO THIS MESSAGE    PRINT   SAVE 

what's the best cam..? 200 1980

K - find one from a B23E, or get a B23E. Lot of grunt at 3000+.

A is fine for heavy loads, spinning the tires from a start, and winter time, but it's no fun otherwise, it dies with +3000 rpm.

--
Stef (81 245 B21A SU M46 3.91) 327000km my volvo pages








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

what's the best cam..? 200 1980

I have no experience with this kind, but a week or so ago, I guy (who I think was from Canada) mentioned how happy he was that he had found an 'A' cam because it provided so much more low (rpm) end pulling power compared to the standard cam.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

what's the best cam..? 200 1980

it depends - do you have auto or stick? K has great top end - with a lumpy idle - good for stick. vx is suppose to be good. Try do a search for cams on the performance section on turbobricks.com, they have alot of info and discussion on the different types of cams. If you ask they will tell you to put a turbocharger on it :)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.