Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hard Shift - After Replacing Tranny output shaft bushing 700 1988

posted by  zotparkerm on  Mon Sep 26 03:33 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 10 14:19 CST 2013
[RELATED]

I just successfully (I think) replaced the output shaft bushing and performed a flush of the tranny in hopes of eliminating a hard shift from 2nd to 3rd. It is not a terribly hard shift, but seems unaffected by the maintenance. The real issue is that the shift seems to happen very late - at about 3000 to 3500 rpm (and I'm not gunning it to make the turbo have fun).

Is there a sensor somewhere that monitors when to shift or do I likely have more serious transmission issues. There are only 191K on this car - so should still be good. Right? :-)

Thanks for any help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hard Shift - After Replacing Tranny output shaft bushing [700][1988]
posted by  zotparkerm  on Mon Sep 26 03:33 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.