Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2016 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Exhaust header installation question. 200

My exhaust header keeps coming loose and I noticed that it is not bolted to the bottom if the car. There is some kind of plate there but it is not holding the header on.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust header installation question. 200

There should be a bracket that bolts to the transmission bell housing via two bolts and it in turn bolts to the head pipe via two more bolts and a couple of "U" shaped pieces. It is not uncommon to have this stuff rust away.

Mark








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Exhaust header installation question. 200

Thanks for your reply. I went to volvo and purchased all the hardware. Someone definately cut the bolt mounting plate to get the header off.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.