Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2021 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Power Window regulator broken need help 700

posted by  rsbrink on  Sat Mar 11 13:48 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Nov 22 21:23 CST 2012
[RELATED]

The power window motor mounting plate is plastic and it broke. Does anyone have one or know where I can get one?? It is for the left rear door of an 87 sedan.







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Power Window regulator broken need help 700

    posted by  Will740turbo on  Sat Mar 11 21:00 CST 2006
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 16:09 CST 2014
    [RELATED]

    do you mean the housing for the motor? I have fiddled with the regulators in front and rear and neither had major plastic components except the casing for the motor. If this is your problem, some ABS plastic cement will do the trick - look in the plumbing section. The method of action is that the glue dissolves some of the material it contacts and as it evaporates the adhesives in the cement and the plastic that was dissolved all bond together.
    good luck.
    -Will
    --
    1990 740 Turbo, on its way to stock specs, maybe beyond








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Power Window regulator broken need help 700

    posted by  someone claiming to be casual on  Sat Mar 11 15:37 CST 2006 [RELATED]

    Junkyard. Expect to pay $15-50. I think I paid 15, some were asking $40-50.

    -86T








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Power Window regulator broken need help 700

      posted by  rsbrink on  Sun Mar 12 07:33 CST 2006
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Thu Nov 22 21:23 CST 2012
      [RELATED]

      The broken part is the mounting plate that the motor and big rear attach to. I have tried glueing but it doesn't seem to hold. This is a large part. Do you know what years were metal and if they will fit??







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.