Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2017 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1988 760 turbo block rebuild, 700 1988

took the block into the local racing shop to have the motor bored out .30 mm over they bored it .030 thousandths over or about .075 mm over. anyone know a source for oversize pistons that big. i know that sounds like a good laugh out loud but im serious, ok so maybe you cant help me there. how about cylinder head for a 760 b 230 ft any input appreciated








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1988 760 turbo block rebuild, 700 1988

    Standard oversize pistons should be available. I know B21FT pistons have become very difficult but B230FT should still be available. The work youre having done is pretty standard machine work. Some shops however bore and sleeve the block (usually just cyl #1), rather than overboring the whole thing.
    That way stock pistons can be reused.

    Try FCP Groton- speak to them on the phone, they carry many more things than are on their website. www.fcpgroton.com
    --
    Rob Bareiss, New London CT ::: 87 244DL- 249K, B230F/M47, Turbo sways, Bilsteins, GT braces, Virgos, Turbo exhaust, Gislaveds for winter!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.