Hi Guys,

I have a problem with my 88 240's tail lights. First the break lights on the driver side was not working. So I cleaned the flex circuit and reinstalled, the break lights worked, except when the head lights are on, then when you hit the breaks all the lights go out. So, fine, I went out and bought brand new tail assemblies and installed them, now all the lights work except for the passinger side break light, and the back up lights stay on all the time, wheather the head lights are on or not. I looked at every thing I could get to and checked for bad goound, borken wires, loose conections, but found nothing wrong. I'm not an electrician and only know the obvious to look for, so could any of you please give me some hints as to what could be going on?

Thanks

Scottc