Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

New Bosch fuel pump has no threads on wire connectors ???? 200 1980

My old 1980 240 pump has positive and negative threaded wire connectors (studs)that use a nut.
This new Bosch unit just has two blank metal pins with no threads?

How do I connect my wires?

Thanks








  REPLY TO THIS MESSAGE    PRINT   SAVE 

New Bosch fuel pump has no threads on wire connectors ???? 200 1980

Your old one has been replaced before. Someone cut off the Bosch bullet connectors and installed the ring terminals. Personally I would prefer the ring connection, as it's more positive of a connection. But for what you need, all I can say is good luck finding the bullet connectors in the right size. They're tricky because apparently they're a weird size.
--
Rob Bareiss, New London CT ::: 92 244-M47-207K ::: 90 745GL-M47-268K ::: 88 245DL-AW70-230K ::: 88 244 SOLD! 87 244 SOLD! Still looking for a bright red or black 244 with sunroof...








  REPLY TO THIS MESSAGE    PRINT   SAVE 

New Bosch fuel pump has no threads on wire connectors ???? 200 1980

You might need to go to Volvo to get those connectors and splice them onto your harness. Or do you have a junk yard nearby you could get a harness from?
Dan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.