Can anyone tell me if there is a limited slip differential that will fit a 122? If so, where can I find one? Thanks.
T.

The later 122 had a Dana 30 rear end. There is a TruTrac rear end available that fits. It should be a 27 spline Dana 30...

Dale

Unfortunately, the drum brake axles (whether Spicer 27 or Dana 30) have 10 splines -- LSDs for those are rare.

Thanks Phil. Rare, yes. But in existence? Any thoughts on how to find one?

T

Hi There!

Here in FINLAND the US-speed shops sell units and parts which are manufactured in USA ex: SPICER. I have one in my 245 (M-31) Its runnig well, only problem was that we had to take out a little bit material, where the main bearrings lies. Dimensions quality is not so good as "original". However all them made in USA. Here we use also ls made by Tamgear, also ZF and Salisbury made parts for Race and Sporting use, standard unit is too weak to race.

Yrs: WEBERMAN / A.M.O.Ylander

Ah...yes, of course. I was going to do an 1800 disc brake rear end swap before I went with the 240 unit so it didn't matter...