Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2004

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Delta Mark Ten CDI, Anyone know where these wires go?

My wifes 69 142 had one of these Delta Mark Ten CDI boxes bolted to the fender, but not hooked up. Im starting to fool around with our 1970 145s and would like to see if it works. Problem being is that there are 4 wires and no diagram :P
Ive seen pictures of NOS ones and there looks like theres some kind of board at the end of the wires, Is there something actually on those boards besides plugs?

I've been searching the web for a couple of weeks now for a clue on how to hook it up without letting the magic smoke out, but no luck.
Im assuming one wire goes to +12, another ground, and the other two on either side of the low tension leads on the coil.

Does anyone have an idea or pic of which wire goes where?
thanks,
Dave.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Delta Mark Ten CDI, Anyone know where these wires go?

    Nevermind
    I found a thread with a link to a thread, with a link to another thread that got me to this one:
    http://forums.pelicanparts.com/showthread.php?s=&threadid=208332&highlight=mark+10b+ignition







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.