Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2020 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size are the bolts for the belly pan? n.m.i. 200 1990

posted by  curiousheights on  Sun Mar 11 04:21 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 21 03:42 CST 2009
[RELATED]








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size are the bolts for the belly pan? n.m.i. 200 1990

posted by  yama on  Sun Mar 11 04:51 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

When ever I need a set I grab the bolts from a parts car holding the front fenders on. Same size.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

What size are the bolts for the belly pan? n.m.i. 200 1990

posted by  Ray S on  Sun Mar 11 04:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 14:28 CST 2014
[RELATED]

If you are talking about the plastic splash pan on a 240, I believe that they are 10 mm.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

I need to replace them, and am looking for diameter, length and threadpitch. n.m.i. 200 1990

posted by  curiousheights on  Sun Mar 11 04:34 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu May 21 03:42 CST 2009
[RELATED]








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Thread: 6.0 dia. x 1.0mm pitch, 3/4' or 1' length, 10mm hex head (nmi) 200 1990

posted by  lucid on  Sun Mar 11 05:23 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

--
Bruce Young
'93 940-NA (current), 240s (one V8), 140s, 122s, since '63.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Thread: 6.0 dia. x 1.0mm pitch, 3/4' or 1' length, 10mm hex head (nmi) 200 1990

posted by  Jorrell on  Sun Mar 11 13:29 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Dec 27 03:00 CST 2012
[RELATED]

Lucid is correct, 6mmx1.0. Bolt heads are 10mm.works fine lasts a long time.

jorrell
--
92 245 245K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently in pieces







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.