Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

244 car, Mustang (?) 02 sensor, making a Rosetta Stone connector 200

posted by  B.C. on  Thu Jun 21 09:52 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

If your brick uses an O2 sensor, then you may know that the "drop in" Bosch price is about 4X the 13982 Bosch that is supposed to work OK once the wires are changed over.

Note that other Bosch p/n sensors can also fit, but with cutting and crimping to hook on to the odd-wad Volvo connector.

My intent is to make a "Rosetta Stone" coupling, Volvo on one end, Mustang (or whatever) on the other. Very short wires in between.

Here's what I need to know. To get the Mustang connector into which the 02 sensor connector will fit, I think I need to go to the parts counter of a Ford dealership and ask for a ??? from a __(year and engine)__ Mustang. AND, I don't know the info on the Mustang.

If you know the answer, please post here. No doubt other bricksters will be interested in this idea.

Many thanks,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 244 car, Mustang (?) 02 sensor, making a Rosetta Stone connector [200]
posted by  B.C. subscriber  on Thu Jun 21 09:52 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.