Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Outside Temp gauge installation Q 945 900

posted by  cvandor on  Sat Oct 13 15:44 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 10 18:45 CST 2013
[RELATED]

I just got an outside temp gauge from a 960 that I'd like to install on my 940. Does anybody know how to wire it? It has 6 wires going to it and I'd like to know which one goes where.
Thanks,

Csaba
'93 945T
'84 245Ti, sold








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Outside Temp gauge installation Q 945 900

posted by  Hovonogila on  Sun Oct 14 09:32 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 22 20:53 CST 2014
[RELATED]

I have the installation instructions that I scanned in with Adobe, that I can email to you. But I would have to send it in several emails because the attachments are too large without a FTP site. The installation is very easy. As long as you can get the cluster out, you're almost home. The car is pre-wired in the harness.
--
I'm stuck on Volvo and Volvo's stuck on me....








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Outside Temp gauge installation Q 945 900

posted by  cvandor on  Sun Oct 14 13:58 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 10 18:45 CST 2013
[RELATED]

Thanks, I already have the gauge installed, I just need to get a sending unit.
bye,

Csaba
'93 945T








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Outside Temp gauge installation Q 945 900

posted by  hardknocks! on  Sun Oct 14 02:14 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 12 06:42 CST 2014
[RELATED]

hello
not sure about the 960 setup.
the 940 ambient temp guage fits in the bottom left of the cluster and is prewired for the guage, the wires are taped/hooked to the back of the cluster on the 940s and its plug and play.
also the wires are up front driver side for the sender.
good luck
mike







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.