Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2018 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ScanTech Lower Control Arms 900 1996

posted by  someone claiming to be another 960 owner on  Wed Nov 28 13:15 CST 2007 [RELATED]

I replaced the OEM lower control arms with ScanTech units from FCP Groton. After 25-30K the rubber in the large bushing is split almost 270 degrees and the small bushing about 45 degrees on both sides. Has anyone replaced the bushings in the Scantech arms with OEM parts? I pitched my originals or I would change the bushings in those. I'm not impressed with the few ScanTech parts I have purchased.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ScanTech Lower Control Arms [900][1996]
posted by  someone claiming to be another 960 owner  on Wed Nov 28 13:15 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.