Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2004 120-130 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Polyurethane bushing lube 120-130 1965

I`ve got new IPD polyurethane suspension bushings (just rear for now) and the lube IPD supplies. Did a search, but seems to be no consensus of opinion on where or if to use the lube. Trying to avoid squeaks! What say you?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Polyurethane bushing lube 120-130 1965

That aqua stuff is wicked - anywhere you've got metal to poly contact is the right answer AFAIK.

Craig








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Polyurethane bushing lube 120-130 1965

If IPD supplies the same grease as SuperPro, it's wicked stuff. It's sticky and thick and doesn't wash off. There is red stuff and white stuff. I'm not sure why they changed from red to white but the white is the later stuff. Both seem to be equally sticky and equally effective.

Re-greasing every spring will save you from squeaks although I drove my 245Ti(RIP) and never regreased the bushings and it never squeaked, even after three years. I would not recommend that treatment...
--
Dale







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.