Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

trans.fill tube nut size please 200

posted by  dobber13 on  Mon Mar 31 14:51 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 19:10 CST 2014
[RELATED]

Is it 15/16ths I can't remember.Need to remove the tube. Thanks, Charlie








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    trans.fill tube nut size please 200

    posted by  Stickbuilder on  Tue Apr 1 04:53 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 03:31 CST 2014
    [RELATED]

    If you absolutely do not have to remove this gland nut, then don't do it. If you are only going to change the fluid, drop the drain plug and refill. Even Volvo says not to try to remove the dipstick tube unless it's necessary. There is not really a filter inside, but a strainer. It does not have to be replaced. If you really must drop the pan, then the easiest thing to do is to remove the bolts at the starter/dipstick tube (there are two of them) and drop the tube with the pan. Don't ask me how I found this information out, or how I know this. Trust me, I do know.....The hard way.

    Bill
    --
    Those who beat their swords into plowshares, will surely plow for those who did not.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    trans.fill tube nut size please 200

    posted by  jon_h on  Tue Apr 1 04:41 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 11:57 CST 2014
    [RELATED]

    Read about it in the archives here before you try it. Can break the weld on the pan
    --
    240s: 2 drivers and some parts cars








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    trans.fill tube nut size please 200

    posted by  Jorrell on  Mon Mar 31 16:40 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Thu Dec 27 03:00 CST 2012
    [RELATED]

    If I recall correctly, 22mm but it has been a while.

    jorrell
    --
    92 245 250K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      trans.fill tube nut size please 200

      posted by  Jac912 on  Tue Apr 1 01:48 CST 2008
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Sat Oct 18 10:43 CST 2014
      [RELATED]

      Hi .... do you recall the size of the return line fitting nut? Don't know if I have a hose big enough to slide over it and direct to the drain pan. Thank you.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.