Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2020 1800 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Plugs for a B20 fuel injection head 1800

posted by  macvolvo on  Wed Apr 2 05:18 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 14:18 CST 2008
[RELATED]

Anyone out there have some advice on plugging the fuel injection ports on a 74 B20 head. I want to put the head on a 1800 with a weber. Thanks in advance!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Plugs for a B20 fuel injection head 1800

    posted by  Volvo From Heck on  Sat Apr 5 03:36 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Oct 13 20:56 CST 2014
    [RELATED]

    Years ago a buddy and I converted many cylinder heads. We threaded the hole with a tap and inserted allen head set screws plugs--clean looking and effective.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Plugs for a B20 fuel injection head 1800

    posted by  Ron Kwas on  Wed Apr 2 10:46 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 04:03 CST 2014
    [RELATED]

    mv;

    If you have access to a bandsaw, just cut some plates of 1/8" alu and bolt them down...like this:

    Source: http://sw-em.com/service%20notes.htm

    Cheers








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    Plugs for a B20 fuel injection head 1800

    posted by  walrus3 on  Wed Apr 2 06:11 CST 2008
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Dec 2 14:20 CST 2013
    [RELATED]

    Not a downdraft Weber, I hope!!

    Plug the ports with 7/8" freeze plugs, saucer type as opposed to cup type.
    --
    George Downs, Bartlesville, Heart of the USA!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.