Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Tach 200

posted by  Nel on  Tue Apr 8 04:57 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 23 08:28 CST 2008
[RELATED]

Trying to install a tach in my 92 240. I have the small clock and large tach combo. I have the sub harness for the clock and it plugs in. What wires go to the tach operating plugs. I can only find a single white/red unused wire.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

Tach 200

posted by  Ron J on  Tue Apr 8 05:15 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:20 CST 2014
[RELATED]

Nel,

The clock harness will get it's power from the tack when it's installed in the instrument cluster. The red/white wire powers the tack. No other connections are necessary.

Have fun,

Ron J







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.