Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2006 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM goes down after brake pedal let go 700

Hi everybody
Yesterday I put new Brembo front discs, new pads and rebuild right caliper (jumbo brakes (one piston caliper), ABS, 740 '91 turbo, AT), bled the system with self-made power bleeder and new Volvo DOT 4+ ( this is not the first time job for me) and here is the problem: when the engine idle and I press the pedal everything looks OK, but when I let the pedal go the car almost stalls, the RPM goes below 500. Can anybody tell me what is going on here?
Thanks in advance!

--
'91 740 turbo SW, '92 940 turbo (PL)








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

RPM goes down after brake pedal let go 700

I'd say it is brake booster related. I'd first check the easy accessible parts; the white plastic valve and the vacuum hose. If these are okay I'd move on to the booster itself.

Erling.
--
My 240 Page








  REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM goes down after brake pedal let go 700

Didn't do anything since last post, and everything look OK now. Is there a ghost in the machine?
--
'91 740 turbo SW, '92 940 turbo (PL)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.