1992 240. has anyone installed an efan? if so, which one? thanks.

Thanks for all the information! Very helpful. I'll write about the details when I do the job.

Tom,

I assume you are talking about replacing the belt driven fan as the 92 already has the aux fan in front of the rad for the AC. I have done this with a heavily modified rad fan assembly from a 2000 Eclipse. It works great and has given zero problems.... A few days after I finished the install of the new one-off fan, someone posted on the BB that the rad fan assembly from a 940 or 960 will bolt right up to the 240 rad (same as 940/960 rad). Beyond getting a 9x0 fan assembly from the bone yard, you will need to add a thermostat switch that "plugs into" the 240 radiator. Beyond that, just add a relay plus wiring to control the fan based on thermostat temperature. If you need help with the relay wiring, give me a holler via email.

Yes, the swap is worth the effort!

jorrell
--
92 245 250K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!

I put this job off for years but living in Texas I had to finally do it to get cool A/C. It is an easy job. Just go to O'Reilly or AutoZone, or other local parts retailer. Pick up a auxillary fan that is appropriate size (mine costs about $60). The fan will come with everything you need to mount it to the front of your radiator. Then just connect one wire to ground and the other to the green wire at the A/C compressor. The fan will run when you have your A/C compressor on but you will not notice it. You do not need to remove the pulley fan.. Mine has been very effective to cool during hot days.
--
1989 240, 1992 745

Here is a place to start-
http://personal.linkline.com/dbarton/fanconversion/

or type "240 volvo electric fan" into your search engine.
--
84 242Ti IPD bars&springs, 89 745 16v M46 IPD bars, 89 744 16v M46 IPD bars, 90 745 AW70, 91 245SE AW70 IPD bars, 93 245 CLassic M47