Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2004 700 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

One-Part Hub/Rotor 1987 (Brakes) 700 1987

posted by  trader1 on  Fri May 22 15:11 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri May 16 16:47 CST 2014
[RELATED]

Before I remove these, (front rotors)is there any reason these cannot be resurfaced? This early one piece set up is new to me with the integral caliper mount. Thanks in advance.

P.S. Searched FAQ and found reference to '88 on only.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    One-Part Hub/Rotor 1987 (Brakes) 700 1987

    uid 18886's pic
    posted by  sdewolfe on  Sat May 23 00:14 CST 2009
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Mon Jan 31 05:56 CST 2011
    [RELATED]

    Howdy,

    The question is; how much is too much? That information is stamped into the rotor. Don't cut even 0.010 more than specified; the disk WILL warp. Ask me how I know this. ;-)

    Original Thickness
    Front
    Solid ..................................... .55 (14.0)
    Vented (ATE) .............................. .87 (22.1)
    Vented (Girling) ........................... 1.02 (26)
    Rear ......................................... .38 (9.6)
    Minimum Refinish Thickness ........................... (2)
    Discard Thickness
    Front
    Solid .................................... .433 (11.0)
    Vented (ATE) .............................. .79 (20.0)
    Vented (Girling) ................................. (1)
    Rear ....................................... .315 (8.00)

    (1) - Information not available.
    (2) - Always use minimum thickness specification stamped
    on rotors.
    --
    Mr. Shannon DeWolfe -- I've taken to using mister because my name misleads folks on the WWW. I am a 53 year old fat man. ;-)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.