Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

This is not directly related volvos but has importance if you live in the rust belt.

What penetrating oil do you recomend when you're working or rusted bolts/nuts? There are so many brands on the market,the only two I can think of off the top of my head are PB blaster catalyst and Liquid wrench.I'm, sure there are many more that I probably have never heard of.Are there any diffrences between diffrent brands or are they all basically the same?








  REPLY TO THIS MESSAGE    PRINT   SAVE 

This is not directly related volvos but has importance if you live in the rust belt.

Always felt PB Blaster did the best. WD40 doesn't really do the trick, but is good for parts clean-up and water proofing.
I just got a can of Gig-a-loo and am pretty impressed so far with it. Haven't tried it on really rusty bolts yet, but it will get its chance.

Glen
--
Glen








  REPLY TO THIS MESSAGE    PRINT   SAVE 

This is not directly related volvos but has importance if you live in the rust belt.

PB Blaster gets my nod. Kroil is just as good but harder to find. Liquid wrench
is gorilla piss.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.