Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

power stages 900 1996

where would the power stages be located on a 960 model? i see the wiring harness going what looks like the intake?








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    power stages 900 1996

    They are on the front and rear of the intake manifold "Ball". 2 screws and a wire connector. They are interchangeable.

    DEWFPO
    --
    1998 S90 083,228 and 1995 964 154,100








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      power stages 900 1996

      thanks for the help guys . the problem was the power stage in the rear was getting a bad connection and was loose so i cleaned the contacts and tighten it back up now im back on the road!!! 96 960.. 169000








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    power stages 900 1996

    There are two. You can see one on the front of the intake pipe right by the throttle body (below the intake manifold). The other is in the same position but on the firewall side of the intake pipe. The front one is easy to get at. The back one? Not so much...
    --
    Dale








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      power stages 900 1996

      FWIW, I seem to recall that they were positioned on the body of the intake manifold for cooling purposes. I'm pretty sure the two modules are interchangeable. I had one fail, and confirmed that it was the module by swapping the two modules to make sure the alternate bank of cylinders failed after the swap.








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        power stages 900 1996

        What did the car run like with the 3 cylinders out?








        •   REPLY TO THIS MESSAGE    PRINT   SAVE 

          power stages 900 1996

          Like absolute crap. It's 3 consecutive, not 3 alternating, so the car rocks like crazy. And we're not talking about 1/2 the hp either. It's more like 1/3 with all the pumping losses in the cylinders not making power. Can't get out of its own way...
          --
          Dale








          •   REPLY TO THIS MESSAGE    PRINT   SAVE 

            power stages 900 1996

            All true. When one of my modules failed, though, at least I was able to limp back the few miles to get home without having to get towed. I was impressed that it at least had that much power!







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.