Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel Injection /ignition wiring harness 200 1980

posted by  bronnie on  Fri May 7 10:31 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Nov 24 17:12 CST 2012
[RELATED]

Hey Gang!!
My indie mechanic and I are looking for a fuel injection/ignition wiring harness for my 1980 242 DL.
My local Volvo dealership did some microfiche research and says they're obsolete and are impossible to find new or in stock anywhere..My indie guy has a search out..(not unlike a kidney donor search..;0))
but only within 100 miles of the LA area.
I checked Rockauto.com and Partsgeek.. no luck so far.. Any ideas would be much appreciated!! Thanks!








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Fuel Injection /ignition wiring harness 200 1980

    posted by  Trev29 on  Sat May 8 00:05 CST 2010
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 05:56 CST 2014
    [RELATED]

    I don't know about the complexities of a FI harness, but the ones for carbs use regular connectors. Basically you just run your own wires with added connectors and/or reuse and reroute the old ones if you only have to cut off damaged ends.
    --
    1980 245 Canadian B21A with SU carb but electronic ignition and M46 trans in Brampton, Ont.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.