Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2009 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

007 AMM in a 1992 ? 200 1992

I just picked up a 1992 240 wagon parts car and it had a bosch LH 2.2 AMM instead of the 016 found in the 2.4 models. I drove the car home and it ran great. can that AMM be used in the 1989-1993 models in a pinch ?
Philvo








  REPLY TO THIS MESSAGE    PRINT   SAVE 

007 AMM in a 1992 ? 200 1992

I just bought ($15 clean) a 016 for the new 1990 245 project as a back up. I was kind of discouraged to think that my 5 extra 007's AMM wouldn't be useful with my 83 or 90. Now it looks like I'll be keeping them on hand for the extended future. They might be the most desirable AMM since they work for so many years.

Great thread.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

007 AMM in a 1992 ? 200 1992

I got a 93 a few years ago with an 007 installed. It seemed to work fine but I put the right one in as soon as I discovered it.
Dan








  REPLY TO THIS MESSAGE    PRINT   SAVE 

007 AMM in a 1992 ? 200 1992

+1 on that in a 91 we bought. The pinout on the LH2.2 AMM is the same with the exception that the 007 has the extra CO pot adjust wire, but the LH2.4 harness ignores it and the LH2.4 computer is good at adapting.
--
Art Benstein near Baltimore

When asked what time it is: "Do you mean now?"







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.