Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

122 PART IDENTIFICATION HELP!!! WHAT IS THIS???

I GOT THIS WHEN PULLING A DONOR ENGINE OUT OF THE JUNKYARD.
MY GUESS IS IT'S A FLEX PLATE ADAPTER FOR AN AUTOMATIC, BUT I CAN'T REMEMBER IF THE DONOR CAR WAS AUTO OR NOT.........

CAN ANYBODY ID THIS FOR ME PLEASE.....

[url=http://www.freeimagehosting.net/image.php?a1c05843fa.jpg][img=http://www.freeimagehosting.net/uploads/th.a1c05843fa.jpg][/url]

[url=http://www.freeimagehosting.net/image.php?a1c05843fa.jpg][img]http://www.freeimagehosting.net/uploads/th.a1c05843fa.jpg[/img][/url]









  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    122 PART IDENTIFICATION HELP!!! WHAT IS THIS???

    That is pretty much what it is. A good contribution to the scrap metal drive.
    After taking it off be sure you have the pilot bearing, washer and snap ring to hold
    the pilot bearing in place. You DON'T want it coming out.
    (I had one get loose once and it sat between the clutch plate and the flywheel
    hub for a while.
    It messed up the clutch plate and the tranny front bearing and seal housing.)







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.