Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2012 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Custom wheels for my sons 244? 200

I finally found a Volvo for my son that he reasonably likes the looks of (a '93 black sedan with Virgo wheels). He would like to see some other non-Volvo 15" or 16" alloy wheels though (he's seen Draco, MultiX and Hydra wheels. He likes the exposed lugs look). I would want him to stay with 15 or 16x7 or less. IPD has only one wheel with that criteria and Tire Rack has none. Any suggestions for us? Thanks, Mike








  REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

I would be interested in your virgos, if you sell them. PM me if you are interested.

Good luck with the son. I have my kids in a 850 and a 760.



Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





  REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 

I got a set of spacers (25mm front, 32mm back) for my car, that lets me use the much more varied and modern looking (which can be good or bad) set of FWD offset Volvo wheels. Also sharing the 5X108mm bolt pattern with FWD offsets are Jaguar S-types and some newer FoMoCo sedans (not really a coincidence, given the corporate relationships that existed for a while). You can also change bolt patterns with the adapters as well, if you wanted to switch to some more common bolt pattern (like 5X4.5").

About the only cars that had the 5X108 with RWD style offset cars were Volvos and (oddly enough) some Ferrari's. Maybe some very wide gold mesh old Ferrari wheels?
--
'63 PV544 rat rod, '93 Classic #1141 245 (now w/16V turbo)



Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





  REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 


IPD sells a nice wheel, if the Virgo's aren't good enough.

http://www.ipdusa.com/Volvo-200/Wheels-&-Lugnuts/Pegasus-Replica-Wheels/p-69-467-4091/

Dan



Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.





  REPLY TO THIS MESSAGE    EDIT   PRINT   SAVE 


I have a set of rims I'd like to sell. They're aftermarket--sold under the Shelby American name. They have exposed lugs (shoulder type--included) and a center cap. They're 14" and were mounted on an 1800E. They have many radial "spokes". E-mail me directly if you have an interest and I'll send a photo-- fastforwardphotoATyahooDOTcom -- Dave



Mark this post as an answer to my question<- Use this feature to mark quality replies to your post.




<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.