Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2022

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

122 Wagon

Hello, newbie here.

After some Alfa's and 02 BMW's I am considering going'Brick" or broke !!

Is 3300.- resonable on a wagon , has some rust but all there.









  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    122 Wagon

    I have two I would sell for less than that.
    You should hold out for a better deal and LESS RUST.
    Anything BUT rust is easy to fix.
    Especially look out for rusty floors; the windshield seal leaks and water runs down the
    firewall into the jute backing under the rubber floormat, which GUARANTEES that the backing
    stays wet. It ferments, becomes acid and rusts the floor through from the inside.
    Before you buy ANY 122 or 1800, get under it and examine the floors. Rusty floors should
    be a deal breaker.
    Other places are the sills under the doors and around the headlight buckets.
    Probably should not buy one from places where they salt the roads.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.