Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2020 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Another speedo repair,87,88 240 200

posted by  Paulii on  Thu Feb 3 18:55 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 03:04 CST 2014
[RELATED]

Hello, Working on a 1987 240, mileage unknown. Just replaced wireharness for the engine, engine computer and spark computer, swapped out the fuel rail and injecters, updated flame trapp to 88 and up. Now I want to tackle the speedo head and get that working, will the 1988 work in the 1987? I think it will but I need to eliminate the temp. compensation board and do some testing for the fuel sender and odometer motor, gear is good, have speed indicated. Does anybody (Art comes to mind) have a run through for the 240 speedo heads to trouble shoot all the circuits. I want to put the 88 in the 87 because it has the reminder for service, I removed the tach and installed the clock;it works, Tach didn't work, but the odometer doesn't work and the temp guage and fuel guage don't work, is it different in circuit wiring or do I just have a bum circuit board. Looking for some help. Thanks. Pauli








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Another speedo repair,87,88 240 200

    uid 27's pic
    posted by  Art Benstein on  Thu Feb 3 20:35 CST 2011
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 20:10 CST 2014
    [RELATED]

    Pauli, I'm pretty sure the 88 is different only in the service reminder and possibly a difference in paint finish, although I thought that came in 89. David Samuels has a better handle on this. My experience with the LH2.2 years is only from yarding.
    --
    Art Benstein near Baltimore

    Why is the man who invests all your money called a broker?








    •   REPLY TO THIS MESSAGE    PRINT   SAVE 

      Another speedo repair,87,88 240 200

      posted by  Paulii on  Thu Feb 3 20:39 CST 2011
      Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
      last visit: Fri Jun 6 03:04 CST 2014
      [RELATED]

      Thanks Art. How do I reach David Samuels?








      •   REPLY TO THIS MESSAGE    PRINT   SAVE 

        Another speedo repair,87,88 240 200

        posted by  chickmagnet on  Thu Feb 3 23:48 CST 2011
        Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
        last visit: Mon Apr 28 06:01 CST 2014
        [RELATED]

        Hi Paulii,

        Without question Art is AMAZING! I discovered the face of the Speedo/Odo has a "K" # to it K39200 or K9800, or a K104???. I believe my 91 has a different order of wireing on the 90 degree connector than what is on the 93. I also noticed inside the Speedo/odo head has 4 female connections on side of the electric motor side of the K39200 while the K9800 has only 3 connections? The coresponding male pins come out of the Light colored plastic housing in the intrument cluster. Someone mentioned just resoldering the joints. I did that and it also helped. I'm a Newbie and this may be really dumb stuff I just typed, but when I came in cold it was a steep learning curve.

        Best of luck, Joe







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.