Swapping the engine mounted sensors may be all you need to do to accomodate the newer engine control system.

Check the pulley location and mounting of the A/C compressor, and the alignment of its drive belt. The 1985 power steering pump and reservoir are quite different, so have a look there, too. P/S reservoir mounting may require some relocation of the wires on the left fender.

It it fits, go for it.

Good Luck,

Bob

:>)

It might be problematic to put an older engine in your newer car -- many local laws involving emissions prohibit this (the reverse, putting a newer engine in an older car, is usually OK), and the older engine may not even have been designed to meet the requirements of the newer car's model year.

Just thought you should be aware. Good luck, in any case.

The motor would be the easy part. Might need an engine wiring harness, black boxes, fuel and vacuum lines.