Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

flametrap 200 1993

Please explain the flametrap, where located, how and when to service. For 93 240 sedan.








  REPLY TO THIS MESSAGE    PRINT   SAVE 

flametrap 200 1993

There is a discussion/drawing & how to in the FAQ.

http://www.brickboard.com/FAQ/700-900/EngineSealsBeltsVent.htm#Flame_Trap_Crankcase_Ventilation_Questions

You can also search the forum and there are quite a few discussion about it.

I hope this helps;

randyB








  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

flametrap 200 1993

Found by typing "1993 flametrap" into the search box...

http://www.brickboard.com/RWD/volvo/1283413/220/240/260/280/93_240_flame_trap.html

Mike








  REPLY TO THIS MESSAGE    PRINT   SAVE 

flametrap 200 1993

I was going to service my flame trap but became concerned that the hoses were so welded on that something was going to break. So I just bought the kit from IPD.
http://www.ipdusa.com/products/5317/3501707k-flame-trap-kit
There is a diagram there that helps to identify the pieces.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.