Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2006 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

86 240 200

posted by  toms90 on  Sun Jan 1 11:00 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 24 21:21 CST 2012
[RELATED]







Please look at the pic and tell me where I need to disconnect the wires? This is the last thing to do so I can lift the engine out. Thanks.

Tom







  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    86 240 200

    posted by  pageda on  Sun Jan 1 11:09 CST 2012
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 24 13:18 CST 2014
    [RELATED]

    That is the engine harness, it disconnect inside the cabin at the ECU and at the grey connector you are pointing to in the picture. Push the ECU connector and harness through the firewall and disconnect the O2 sensor.

    There is also a harness connecting to the ICU that will need to be removed or you can take the ICU out with the engine.
    Dan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.