Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2002 200 INDEX

[<<] [>>]

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

REPLY TO THIS MESSAGE

SAVE

rear driver door replacement 200 1993

posted by someone claiming to be Teal 240 on Tue Jun 18 09:55 CST 2013 [RELATED]

I am looking at replacing the rear door rather than doing the body work as doors are getting pretty cheap at teh PnP's. Is the easiest way to remove to the door to take the interior trim off and remove the 6 bolts that connect the hinge to the pillar? other than removing the wiring harness are there any tips? thanks in advance, Greg

REPLY TO THIS MESSAGE

SAVE

rear driver door replacement 200 1993

posted by Nel621 on Tue Jun 18 11:17 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Thu Oct 23 12:48 CST 2014

[RELATED]

After removing the wire harnesses remove the door from the hinge. Leave the hinge attached to the B pillar as it will be easier to align the door this way.You may get lucky and just line up the new door along its' "old" marks.

REPLY TO THIS MESSAGE

Replies to this message will be emailed.

SAVE

rear driver door replacement 200 1993

posted by Epic2112 on Tue Jun 18 11:06 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Mon Oct 20 12:15 CST 2014

[RELATED]

You might be better off leaving the hinges on the car and just unbolting the door. It's been a while since I've done this so I'm not certain, but I think doing that will save you the trouble of removing the big plastic (fragile) B pillar trim.

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.