Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2024 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1989 240,engine running poorly after clutch install. 200

posted by  jerry33 on  Wed Apr 5 15:55 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Had a clutch installed by a shop and now have a miss in the engine. No falt codes. Replaced crank sensor. I would like to know at what position the smothe spot where thair are no holes on the edge of the fly wheel is supposed to be when at top dead center. I am thinking the flywheel may have been installed out of position. New plugs cap and roter,no vaccum leaks. Thanks Jerry








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    1989 240,engine running poorly after clutch install. 200

    uid 27's pic
    posted by  Art Benstein on  Wed Apr 5 19:51 CST 2017
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Fri Oct 17 20:10 CST 2014
    [RELATED]

    "I would like to know at what position the smothe spot where thair are no holes on the edge of the fly wheel is supposed to be when at top dead center."

    It should be at the starter opening.

    --
    Art Benstein near Baltimore

    If you think nobody cares if you're alive, try missing a couple of car payments.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.