Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2014 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 AC Water Valve Vacuum Application control? 700 1988

posted by  someone claiming to be Volvouser on  Sun Apr 23 12:26 CST 2017 [RELATED]

Hi guys!

When replacing the water valve in my AC equipped 740 -88 (due to leakage), I noticed that vacuum is never applied to it (it should be applied at "Max cool" and temp lever at leftmost position). This causes the heat to never cool down entirely, even when the temperature lever is in the leftmost position. I know, turning on the AC gives me cool air, but it would be nice to be able to turn off the coolant flow in the heater core completely to maximize the coolness of the incoming air.

So, my question:

Do you have any experience regarding the vacuum application control mechanism? Where to check first?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 AC Water Valve Vacuum Application control? [700][1988]
posted by  someone claiming to be Volvouser  on Sun Apr 23 12:26 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.