Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Bleeder Screws 200

posted by  yama on  Thu Apr 27 16:54 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Anyone know of a good place to purchase front bleeder screws? NLA at FCP.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    Front Bleeder Screws 200

    posted by  riverbend on  Thu Apr 27 19:11 CST 2017
    Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
    last visit: Wed Oct 22 15:29 CST 2014
    [RELATED]

    This is what I found several years ago working on my '92 240:


    The thread for the front caliper bleeder is 1/4-28. Napa part number 27864 fits and works. The hex is somewhat more substantial then the stock screw.

    The rear ATE caliper bleeder is an M7-1.0 pitch thread. Napa part number 23928 works for those.

    Not having tried these on your car, you will have to make sure that they work for you. Brakes are important...

    Greg






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.