Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2020 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1983 240 speed/odometer cable greasing? 200

Howdy Folks,
About to replace my speedometer/odometer cable and
read on this site and on the package that the cable should be
greased at time of fitting? The cable does not seem
to be able to be removed from the cables sleeve?
Has anyone ever figured out how to grease the cable while
it is in the sleeve? Or does the cable pull out of the sleeve?
I don't want to break it by pulling on it too much?

Joseph in New Mexico








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    1983 240 speed/odometer cable greasing? 200

    What I finally did was use synthetic oil and a syringe
    and filled the end piece then allowed it to seep in.
    I put about 2 ounces in the sleeve.

    All done and installed now.

    Thanks,
    Joseph in New Mexico








  •   REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

    1983 240 speed/odometer cable greasing? 200

    Your old cable lasted 30 years, a new one should last at least half that. I wouldn't bother.
    --
    Keeping it running is better than buying new







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.