Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD




  REPLY TO THIS MESSAGE    PRINT   SAVE 

240 manual window regulator 200 1988

My driver window would fail to roll up. It kind of "ratcheted". I removed it and one of the arms was bent. I straightened it, and greased all moving parts. It worked.... for a while. It keeps jumping the track in the front vertical track. Any suggestions?








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    240 manual window regulator 200 1981

    The tips of the teeth on the big gear wear down causing the little gear on the crank to skip. The winder mounting holes are slotted horizontally. It may help the tracking to move the winder a little bit toward the front vertical track. When you do this the window will move with it.








  •   REPLY TO THIS MESSAGE    PRINT   SAVE 

    240 manual window regulator 200 1988

    I can send you a good one. email me---fastforwardphoto(AT)yahoo(DOT)com---I'll be on the road this weekend at Dominion Raceway in VA and back on Monday. -- Dave







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.